Zephyr CTP-E 48SX Guide d'installation télécharger pdf (Page 19)

www.zephyronline.com

Maint enance - C le aning

Surface Maintenance:

Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent , or steel

wool/scouring pads which will scratch and damage surface.

For heavier soil use liquid degreaser.

After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and bu out the stainless luster

and grain. Always scrub lightly, with clean cotton cloth, and with the grain.

Do not use any product containing chlorine bleach. Do not use “orange” cleaners.

Bae Filters

The Metal Filters tted by the factory are intended

to lter out residue and grease from cooking. They

need not be replaced on a regular basis but are

requiredto be kept clean.

Filters should be cleaned after every 30 hours of

use. Use the Filter Clean Reminder function on the

controls to determine when lters require cleaning.

Remove and clean by hand or in dishwasher.

Spray degreasing detergent and leave to soak if

heavilysoiled.

Remove lters by sliding away from center of hood

and pulling down.

Dry lters and re-install before using hood.

Replacing Bae Filters

Should lters wear out due to age and prolonged

use, contact Zephyr to purchase replacements.

Handles

1 2 ... 14 15 16 17 18 19 20 21 22 23

Pas de commentaire

Zephyr CTP-E 48SX Guide d'installation Page 19