Zephyr AK9800 Guide d'installation télécharger pdf (Page 14)

INSTALLATION

STEP 13

STEP 15

STEP 17

STEP 14

STEP 16

STEP 18

1. On Cyclone & Whirlwind models, be sure to pull

both grease tubes over its opening.

1. Turn on electrical supply or plug into receptacles.

1. Reinstall electrical box cover.

1. Next, fasten the 3 front screws and begin tightening

all screws from rear to front.

1. Connect duct to opening, inspect and tape all joints

with approved aluminum or duct tape.

1. Reinstall bottom splash shield by first fastening 3

rear screws, (do not tighten all the way).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21

Pas de commentaire

Zephyr AK9800 Guide d'installation Page 14