Zephyr CPA-E42ASX Guide d'installation télécharger pdf (Page 18)

13. Optional duct cover installation:

a. Remove the support bracket from the Duct Cover

assembly and attach it to the ceiling with 2 drywall

anchors and screws

Note: The printed index on the bracket must match

the center line previously drawn (See installation

step 2).

Conduit

Duct

Position

reference

Position

reference

CenterLine

Duct cover

support barcket

Installation - Installing the Duct Covers

Unscrew the 4 screws that fix the section of the Duct

Cover (Starting collar) and release all parts.

Install the upper section to the support bracket with

2 screws.

Note: Check that joined seam is positioned towards

the back.

Note2: The lower section (Collar) of the duct cover

assembly must be installed at the end of the

installation with 2 screws.

Support

Bracket

Upper

section

Lower

section

(Collar)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 26 27

Pas de commentaire

Zephyr CPA-E42ASX Guide d'installation Page 18