Zephyr AK9440AS Guide d'installation télécharger pdf (Page 18)

Features & Controls – User Interface

www.zephyronline.com

Mesh Filter Clean Indicator (always enabled)

- After 30 hours of fan usage the Graphic and words “

clean mesh filter” will illuminate indicating it is time to clean

the mesh filters. Graphic and words will remain illuminated until reset.

- To reset: With liner off, hold the Button for three seconds, after three seconds the Graphic and words “

clean mesh

filter

” will turn off and the 30 hour timer will reset.

Clean Air Indicator

- Clean Air is a feature that turns the fan on every 4 hours for 10 minutes to remove stagnant air in the kitchen.

- To enable Clean Air Function:

- With liner off, hold the Button and Button simultaneously for three seconds. The Graphic and

words “

clean air” will illuminate and the fan will turn on speed 1 for 10 minutes. After 10 minutes the fan

will turn off and the 4 hour timer will begin.

- Graphic will remain on when Clean Air Function is enabled, even if fan is not on.

- To disable Clean Air Function:

- With liner off, hold the Button and Button simultaneously for three seconds until Graphic

turns off.

- If the user changes the fan speed while the Clean Air Function is in use, the words “

clean air” will turn off but the Graphic

will remain illuminated. If the user presses the Button at any time the 4 hour clean air timer will reset.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Pas de commentaire

Zephyr AK9440AS Guide d'installation Page 18